RSS   Newsletter   Contact   Advertise with us
Post Online Media
Post Online Media Magazine

100 watts into 8 Ohm from great Sugden Grande amplifier

Share on Twitter Share on LinkedIn
Dale Davies |
Sugden Grande amplifier
Audio   The amplifiers are best described as instrumentation, class A

The Sugden Grande amplifier is a mono block amplifier operating in ‘Pure Class A’ mode.

Sugden Grande amplifierEach mono block houses dual matched amplifiers with the output stages in the floating bridged mode. The amplifiers are best described as instrumentation, class A, floating bridge power output amplifiers, dc coupled with current feedback. The amplifier is equipped with an input board with user logic switching for balanced or phono/asymmetric inputs. Also on the input board is a six dB attenuation facility for input signal matching. It produces 100 watts into 8 Ohm.

Sugden Grande amplifierThe mono blocks are housed in an aluminium chassis with massive extruded aluminium heat sinks for the necessary heat dissipation associated with pure class A. The Grande is the most powerful pure class A amplifier in the Sugden range and has involved intense development over a period of years. Many thousands of hours have been spent on circuit layouts, component selection, overall physical relationships of the circuitry and its main case.

Sugden Grande amplifierFrom the balanced or asymmetric input through the controlled gain stages to the floating bridged output and final tuning, absolutely no compromises have been made in achieving an exceptional amplifier with remarkable musical performance. High quality connectors and silver wiring are utilised to give long life and the ultimate musical performance. Each amplifier is equipped with a custom designed mains transformer of -430 watts with 4 separate windings. The power supplies to the floating bridge output stage are smoothed by two specially developed audio grade capacitors, having a combined capacitance of 40,000uf.

Sugden Grande amplifierThe output stage has 12 output devices, each having an output capability of 17 amps and maximum power rating of 200 watts each. The tone burst potential would be in the region of 7kw, or massive headroom for the perfect sound stage. The final output of the amplifiers is coupled to the speaker output binding posts via a protection board. This board includes the switching of Mosfet power devices of extremely low on resistance, timed to enable soundless connection to the speakers.


What to read next
POST Online Media Contact